How To Outsmart Your Boss In Double Glazing Window Locks Repairs

· 6 min read
How To Outsmart Your Boss In Double Glazing Window Locks Repairs

Double Glazing Window Locks Repairs

Double glazing window locks repairs are essential to protect your home. Insecure hinges and handles can let draughts in your home, making your windows vulnerable to burglars.

It is possible to repair stiff uPVC handles or locks without replacing your door or window. In most cases, cooling or lubricating the mechanism will solve any issues.

Broken Glass

Over time, double glazing window locks can wear out. As this occurs, the handles may become difficult to open or even locked shut. This can cause issues with ventilation, and could also pose a security threat. It's important that you get the window fixed as soon as you can.

Double-glazed windows are made up of two or more glass panes that have gas in between to provide insulation. A seal also holds the panes together. Condensation between the glass panes is typically an indication of an issue with one of these seals, and will need to be replaced.  double glazing repair  involves replacing just the one window pane and is much less expensive than replacing the entire window.

A blown seal in windows with double glazing typically results in cloudiness and condensation. It can be caused by a number of reasons, such as air leaks or excessive moisture in the property. If you spot the issue, it's crucial to contact a double glazing expert to replace the gas seal and seal in your double-glazed windows.

It is possible to replace one pane of double glazing glass but it is not recommended to do so without the help of a professional. It is important to have the proper tools and knowledge in order to perform the task safely. You could end up damaging the window frame, or your health if trying to do it yourself.

Many people use a crowbar in order to open their double-glazed window when it's stuck but it will typically leave the window frame damaged and swollen. A specialist in window repairs can take the handle from your window and open it without causing further damage. They can also change obsolete window mechanisms to new modern mechanisms.

Over time, the hinges on windows get stiffer and more difficult to open, especially when the area is noisy. To avoid this happening, it's a good idea to lubricate the hinges on a regular basis using silicone spray. Avoid closing the window with the handles or closing it with a lot of force. This can damage the hinges.

Broken Sash


This is a common problem for older double glazing windows. It can be difficult to lock and open a window if the upper sash has fallen out of its pocket. This is usually because the pins are not engaged, or a balance shoe has disconnected. Each sash is unique and it is important to know how yours is set up prior to trying to fix this.

The best method to resolve this problem is to remove the sash and wash it thoroughly. This will also reveal if the sash is still an appropriate match. If not, you can add stoppers for the sash to keep it in place. These can be purchased online or at most hardware stores. After cleaning the sash, you can replace the parting beads and lubricate pulley axles using Teflon or silicon spray. It is a good idea to label the weights prior to when you take them off to ensure that you return them correctly.

A damaged handle is another common problem. It can be difficult to tell if your window handle is damaged, but there are a few indicators. If the handle feels stiff or clunky, or if it doesn't feel secure, it is likely damaged.

It could be due to lack of use or the handle could have broken or become detached. In some instances, the handle may be damaged internally and cannot be repaired. However, it's worthwhile to try to resolve the issue as quickly as is possible.

To remove the window sash you might need to take off hinges that attach it to the frame. It's not an easy task, so you'll need someone to help hold the sash in place. After you have removed the hinges, it is important to wash the surrounding area. Reattaching the hinges is a good idea. You can test the handle to verify if it is working correctly. If it doesn't then you should consider replacing it. This will ensure that your window is as secure as it can be.

Broken Handle

The window handle is a delicate piece with intricate mechanisms, and it's common for them to degrade or break in time. As such, it's essential that broken handles are repaired as soon as possible to avoid inability to function and security issues.

Fortunately, it is not difficult to replace the window handle. The window handle can be replaced by anyone with some DIY skills. Contrary to the sash that is secured by a number of bolts, a window handle only requires one or two screws. It is essential to test the handle once it's been installed to make sure that it works properly. This includes locking the handle and searching for holes that could allow drafts to infiltrate your home or allow burglars to gain access.

The most frequent cause of broken handles on a window is simply wear and tear caused by frequent use. However the force or stress that is applied to it can cause a broken handle. Slamming or forcing a window open can put additional stress on the handle, which can increase the chance of damage, so it is always recommended to perform all handling operations carefully and gently.

Other reasons for a damaged handle could be due to poor maintenance, ageing or design issues. The handle can wear out prematurely because of an absence of regular cleaning and oiling. This is usually caused by dirt or debris that has built up over time. The handle can also be weakened because of improper installation or issues with alignment.

If the fixes previously mentioned don't work and the tasker isn't able to solve the issue, the Tasker may require access to and take out the lock mechanism itself. This could mean taking the frame off or breaking out the window frame and bead made of plastic (to give the Tasker more room to maneuver). A replacement lock could then be fitted which matches the profile of the current uPVC handle. The new handle can be attached and the procedure is complete. Tasker will give you an estimate for the cost of repair if this is the situation.

Faulty Lock

When window locks become damaged, it's crucial to have the problem fixed immediately. A damaged window could cause the door to open, causing draughts and expose your home to burglary. Window lock repair is usually a minor job, but it's best to have an expert handle the issue before it gets worse and costs more money in the end.

UPVC window handles come in two different styles: cockspur handles and espagnolette handles. The first utilizes a central rod that operates the locking cams, which are shaped like mushrooms, which lock into window frame keepers. The latter comes with an attached handle to a spindle that protrudes into the rod to trigger the lock's mushroom-like locking cams which are also referred to as locking mushrooms. The latch of the lock then clips into the mortise of a window frame's catches.

Both kinds of UPVC windows locks are susceptible for damage, particularly in older homes. This can happen when the sash becomes warped or misaligned, and it may even come loose. In these situations, the lock must be replaced in order to prevent draughts or loss of energy efficiency. A Tasker can replace the defective locks for you and give you peace of mind knowing that your windows are secure from burglars.

A Tasker will first examine the double glazing of your window to determine the issue. Once they have the required information, they'll prepare their tools before arriving at your home. They'll usually bring a Phillips head screwdriver and needle nose pliers. wood glue and fine-grit papers.

If the sash is not aligned properly the Tasker needs to loosen the screws holding both parts of the lock to the frame of the window. Then, they'll remove the latch and then fill the mounting holes with wood putty (if appropriate) and sand the area until it's smooth with the rest of the window frame.

If the lock is rusted, they'll clean it using wire brush or oil, and then lubricate it with grease to ensure it's working smoothly. They'll also make sure that the latch is in a good condition and re-install it.